Solutions for Your Honda’s Grinding Brakes in St. Lowellby Mechanics Direct May 11, 2020
If there’s one thing that all drivers know, it’s that your brakes are very important and need to be treated with care. Responsible for slowing your car and preventing accidents which could be life or death, neglecting your brakes could have serious consequences.
Of course, brake issues can vary in severity, but unless you’re a car expert you won’t actually be able to know if you’re dealing with a serious issue or a minor problem, so it’s important to always treat any symptom from your brakes as serious and attend to them accordingly.
One of the most common brake issues that city drivers most commonly experience is the squeaking and grinding of their Honda’s brakes. Stop and start driving can put a strain on your brakes, resulting in unwanted sounds that need addressing. Therefore, in this article we’ll be taking a closer look at this problem, learning about some of the different types of part failure that can cause this issue, as well as the process of getting it fixed.
The Cause of Squeaking or Grinding Brakes
Let’s be honest, any repetitive noise you hear from your car can be grating and have an impact on your driving experience, let alone the increased risk that comes with it. But what parts are to blame for squeaky or grinding brakes? We’ve listed the most common culprits below.
1. Worn Out Brake Pads
Your brake pads are intended to cushion your brakes, dampening down any noise and preventing parts from grinding together. However, given time and the potential lack of maintenance, your Honda’s brake pads can become worn out. This will leave parts rubbing against one another and can increase the risk of rotor damage which can result in a more expensive repair.
2. Low-Quality Brake Pads
If you’ve replaced your brake pads or have gone to a non-specialist auto shop for replacement then you might be dealing with the effects of off-brand, aftermarket brake pads which are of a much lower quality than OEM Honda Brake pads.
If you live near a desert, or in a hot and dry location then it is likely your brake pads will deteriorate faster than those living in colder climates.
4. Foreign Objects
You may have a foreign object stuck between your Honda’s rotor and caliper which would account for a grinding or squealing sound. To prevent damage you’ll need to take your Honda to the shop for diagnostic work.
Brake servicing can be quite expensive, but it is important to remember that caring for your car in this way is essential for your safety and the safety of those around you. Professional servicing and repairs of your Honda’s brakes can cost between $200-700 per axle. Responding to your brake issue quickly can help ensure your repairs sit at the lower end of this price range.
Brake servicing is expensive because a range of processes need to be undertaken. These processes give your brakes a thorough assessment to ensure they’re working correctly and are safe. In general, a brake service will include the following:
- Brake inspection
- Replacement of brake pads
- Replacement of rotors (if needed)
- Replacement of brake fluid
- Vehicle alignment
We cannot stress enough that when it comes to brake problems you shouldn’t delay in getting the problem fixed. Keep an eye on your Honda’s gauge cluster to assess whether you need servicing. You should also pay attention to your brake light. If you see this illuminated you must take action immediately to keep your car safe and prevent serious brake damage.
If you’re a resident of North Chelmsford, Chelmsford, Drycut, Tyngsborough, Westford, or Lowell, MA and need speedy brake repairs that have you back on the road fast and worry-free then look no further than Mechanics Direct. With a five-star rating over nearly 250 reviews, we’re the communities leading choice, and with our incredible 3-year/36,000 mile warranty on all repairs it’s not hard to see why!
We want you to experience the very best that your vehicle can give you, and because of this we perform a courtesy 110-point inspection on every vehicle that comes into our shop. This means we can spot even the most minor of issues before they have a chance to become big problems. If you’re looking for top-quality repairs from a name your can trust, call Mechanics Direct today and find out how we can help you.